Home — Product — Special — BCM1 Crossover Manifold

BCM1 Crossover Manifold

The COM-1 Series crossover manifold system consists of two BR1-type stainless steel regulators (other type optional) mounted on a panel-mounting-type bracket shown with optional gauges. The primary regulator,supplied with a tamper-proof nut, is set at an outlet operating pressure at least 15 psig higher than the secondary regulator (supplied with a standard adjusting knob). As the primary supply source depletes and the operating outlet pressure of the primary regulator falls below the preset operating pressure of the secondary regulator, the secondary regulator takes over. Once this occurs, the secondary regulator can be manually adjusted 1⁄8-turn clockwise, the secondary regulator is now the primary and the depleted supply source can be replaced.

Product introduction

● Inlet 20 µ m filter increases service life

● Safety relief valve protection equipment

● Wall-mounted installation for easy observation and operation

● Optional pressure switch alarm

Technical parameters

● Maximum inlet pressure 6000psi (414bar)

● Pressure control range 0-500psi (34.4bar)

● Flow coefficient (CV) 0.06/0.025/0.2/0.5

● Operating temperature: -40 ℃ to+260 ℃

Installation dimensions


How to order


Related products recommended